EN
40
MTV3017
5. At about midway through the defrosting time turn the food over, and resume the program by pushing the QUICK
START/START button.
6. After the defrosting stops, the unit will turn off.
7. Open the door and remove the food.
Defrost by time function
1. Place the food in the oven and close the door.
2. Activate the defrost by time function by pushing the TIME DEFROST button. DEF2 will be displayed.
3. Set the defrost time from 5 seconds to 95 minutes by turning the TIMER/POWER/WEIGHT button.
4. You will turn the unit on by pushing the QUICK START/START button.
5. At about midway through the defrost time turn the food over, and resume the program by pushing the QUICK
START/START button.
6. After the defrosting stops, the unit will turn off.
7. Open the door and remove the food.
Multistage cooking function
Cooking certain types of food requires several stages (e.g. long, moderate cooking with a short, intensive finish, or
defrost and subsequent cooking).
a) 2 or 3 stages of cooking
1. Place the food in the oven and close the door.
2. Push the MICROWAVE/GRILL/COMBI button. P100 will be displayed.
3. Select the required program and cooking time (see the section Microwave cooking, grill and combined mode).
4.
Do not run the program!
5. Push the MICROWAVE/GRILL/COMBI button. P100 will be displayed.
6. Select the required program and cooking time (see the section Microwave cooking, grill and combined mode).
7. In case you need another cooking stage, repeat steps 5 and 6.
8. You will turn the unit on by pushing the QUICK START/START button.
Note:
If you need to prolong the time during cooking, push the QUICK START/START button as necessary.
If you need to stop the current program before the preset time expires, push the CANCEL/STOP button. By pushing
the button again, you will reset the program and the time will be displayed.
9. After the heating stops, the unit will turn off.
10. Open the door and remove the food.
b) D cooking
1. Place the food in the oven and close the door.
2. Select the defrost function by time or weight, and set the required time or approximate weight of the food (see the
sections above).
3.
Do not run the program!
4. Push the MICROWAVE/GRILL/COMBI button. P100 will be displayed.
5. Select the required program and cooking time (see section Microwave cooking, grill and combined mode).
6. If you need another cooking stage, repeat steps 4 and 5.
7. You will turn the unit on by pushing the QUICK START/START button.
Note:
If you need to prolong the time during cooking, push the QUICK START/START button as necessary.
If you need to stop the current program before the preset time expires, push the CANCEL/STOP button. By pushing
the button again, you will reset the program and the time will be displayed.
8. After the heating stops, the unit will turn off.
9. Open the door and remove the food.
