Concept2 MNV6760, Руководство пользователя

Страница: 128 / 140

128 MNV6760
EN
Dimensions and fastening of the cover plate on the door of the dishwasher
• The dimensions and location of holes on the cover plate are shown in Pic. 10. The dimensions are given in mm.
• Attach the handle to the cover plate and make sure the screw heads are screwed properly and that they do not
stick out of the back side of the plate.
• The weight of the cover plate should be between 3 –4 kg.
• If necessary, put the feet in the holes on the bottom of the dishwasher (Figure 11a). The height of the dishwasher
can be adjusted by pushing or pulling the feet (Figure 11b). Then place the dishwasher in the cabinet.
• According to the dimensions shown in Fig. 12, attach the hinges to the cover plate.
• Put the cover plate with the hinges in place and then attach it to the bottom plate of the cabinet (Figure 12).
• Open the dishwasher door to the maximum, slide the rails with the plastic holders for attaching the cover plate
to the desired height and secure the holders to the cover plate according to the height of the cover plate and the
Figure 13.
• After attaching the cover plate to the holders and closing the dishwasher door, the cover plate should be parallel
to the surrounding cabinets (should not protrude).
• If the cover plate protrudes, the dishwasher is not tucked in enough, or the hinges are poorly attached to the
bottom of the cabinet.
Pic. 9
Space for hoses
and electric power plug