Concept2 MNV6760, Руководство пользователя

Страница: 124 / 140

124 MNV6760
EN
CLEANING AND MAINTENANCE
Regular maintenance and inspection prevent malfunctions. To maintain a perfect appearance of the interior of the
dishwasher, we recommend using a special dishwasher cleaner once every 4–6 months.
• Check the spray arms and make sure there are no deposits of fat and lime. If deposits occur, fill the detergent
dispenser with the detergent and start the washing program on the highest set temperature.
• Wipe the door sealing with a damp cloth regularly to remove any deposits.
• Check the indicator of the amount of the regenerating salt and refill the container if needed.
• Check the indicator of the amount of the rinse aid and refill the container if needed.
Filter system
The filter protects and prevents larger food remains or other objects
getting to the water pump. Larger objects can clog the filter, in this
case it is necessary to clean the filter.
The filter system (Pic. 6) consists of a main filter (A),
a fine filter (B) and a coarse filter (C).
Main filter (A)
• Food remains that are stuck in this filter will be washed away by the lower spray arm.
Fine filter (B)
• It filters smaller pieces and prevents them from creating deposits.
Course filter (C)
• Larger pieces of food and objects (pieces of bones, glass, etc.), that could block the drain, are filtered in the
coarse filter. To remove the coarse filter, turn it anti-clockwise and remove the filter upwards.
Note:
• For best results clean the filter regularly. We recommend cleaning the filter after each washing cycle.
• Take out the filter, remove any food residues and run it under the tap.
• Put the filter back in its place after cleaning.
Caution!
Never use the appliance without the filter system inserted properly. Improper placement of the filters can lead to
reduction of the washing effectiveness and may cause damage to dishware and cutlery.
Cleaning the filter system
1. Turn the filter counter clockwise.
2. Remove the filter system by lifting it upwards.
3. Rinse the filters under running water. Use a brush to clean the fine filter.
4. Insert the filters back and lock them by turning.
Pic. 6