Concept2 MNV6760, Руководство пользователя

Страница: 123 / 140

123 MNV6760
EN
6. Press button (7) repeatedly to select the desired program. The display (3) shows the preset time of the selected
program. The wash program runs in the following order:
ECO – Glass – 90min – Rapid – Intensive – Normal – ECO.
7. If you require a delayed start, press the delayed start function button (2) repeatedly. The delayed start can be
set up to 24 hours.
8. After selecting the program and adjusting, close the door of the appliance. The washing program or the
countdown of the delayed start will start.
9. You will hear an eight-fold beep sound after the washing program is done.
10. Open the appliance door and press button (1) to turn the appliance off.
Caution! Be careful while opening the door of the appliance, a large amount of water vapour can be released
or hot water can spurt. There is a danger of scalding!
11. Hot dishes are very fragile. We recommend leaving the dishes to cool down for about 15 minutes before
unloading.
Changing the program during the running washing program
If you decide to change the currently running program, make sure there is enough detergent in the dispenser,
or whether it was used and it is needed to be refilled before starting a new washing program (see „Loading the
detergent“).
1. Open the door slightly to pause the running washing program. Wait until the spray arm is completely stationary.
2. Press and hold button (7) for more than 3 seconds. The appliance will switch to standby mode in which you can
change the washing program setting.
3. Close the door after you are done resetting. The washing cycle will continue after a few seconds.
Caution!
Be careful while opening the door of the appliance, a large amount of water vapour can be released or hot water can
spurt. Hot water with the detergent can be of a chemically aggressive nature and may have detrimental effects on
your skin or furniture.
Note:
• If you open the appliance door during the running wash program, the program will be paused.
• A beep sound occurs every minute to warn the door is open during the running program.
Adding dishes to the dishwasher during the running washing program
1. Open the door slightly to pause the running washing program. Wait until the spray arms are completely
stationary.
2. Add the dishes into the dishwasher and close the door. The washing cycle will continue after a few seconds.
Caution!
Be careful while opening the door of the appliance, a large amount of water vapour can be released or hot water can
spurt. Hot water with the detergent can be of a chemically aggressive nature and may have detrimental effects on
your skin or furniture.
Tips for best drying results
• The drying effect will be always less effective on the dishes made of unsuitable material (e.g. plastic) than on
other dishes.
• Always place the dishes in a way that water cannot stay in the hollows of the dishes.
• Larger amounts of water remaining in such hollows cannot be dried properly.