74
MNV2560
EN
DISHWASHER CONNECTION AND ASSEMBLY
General
Standard and built-in dishwashers installed additionally as free-standing appliances must be protected from overturning.
They should, for example, be screwed to the wall, or placed under a compact worktop fixed to cupboards.
The dishwasher has to be expertly connected to ensure its proper operation. The data for water input and output and
electric parameters must correspond to the data indicated in the technical parameters or assembly instructions.
Preparation for installation
The built-in dimensions are shown in Figure 12. Leave a minimum space of 50 mm around the open door.
Do not use rough tools or hand-washing sponges. They might scratch the surface. Use a wet cloth soaked in water
with detergent.
• When leaving your apartment for a longer period of time, run a dishwashing program with the dishwasher empty;
once the program is over, disconnect the power supply cord from the electric socket, close the water tap, and leave
the door slightly open to prevent dampness and odour from accumulating inside. The ajar door also prolongs the life
of the door seals.
• If the appliance is to be relocated, keep it in the vertical position during transfer. If this is impossible, turn and move it
onto its back side.
• Impurities accumulated around individual seals are one of the sources of odour. Check them and wipe with a wet
cloth if needed.
Fig. 12
Prostor pro přívod
elektřiny a vody,
odtok vody
Prostor pod
skříňkou
600 mm
600 mm
815 mm
