Water hardness
Indicator combination
salt consumption
(gram / wash
cycle)
Wash cycle / 1kg
salt
°dH
°fH
°Clarke
mmol/l
0~5
0~9
0~6
0~0,94
H1 (Rapid)
0
/
6~11
10~20
7~14
1,0~2,0
H2 (1Hour)
20
60
12~17
21~30
15~21
2,1~3,0
H3 (1Hour, Rapid)
30
50
18~22
31~40
22~28
3,1~4,0
H4 (Glass)
40
40
23~34
41~60
29~42
4,1~6,0
H5(Glass, Rapid)
50
30
35~55
61~98
43~69
6,1~9,8
H6(Glass, 1Hour)
60
20
Note:
The dishwasher is factory set for medium water hardness H4.
Filling the regenerative salt
Effects of the salt
During the washing, salt is automatically washed out of the container into the softening device, where it dissolves cal-
cium. The dissolved calcium is washed out of the unit. The water softening device is then ready for the next operation.
This regenerative process works only if the salt dissolves.
1. Pull out the lower rack.
2. Open the container closing (Fig. 2).
3. Pour 0.5 l of water into the container before the first use.
4. Put the supplied funnel on the container opening.
5. Pour the regenerative salt slowly into the container (capacity about 1.2 kg).
The salt will wash excess water out (Fig. 3).
WARNING!
Use only regenerative salt designed for dishwashers. Do not use kitchen salt!
Never use dishwasher detergent in the water softener container!
6. Close the container and fasten the closing gently.
Note:
Indication to add regenerative salt on the control panel will be illuminated first. It will go out after a while, when
a sufficient salt concentration has been achieved.
Warning
Never put dishwasher detergent in the regenerative salt container. You could destroy the softening device.
79
MNV2445
EN
Fig. 2
Fig. 3
