MAINTENANCE AND CLEANING
By regular checking and maintenance you may prevent defects before
they occur. Therefore, you should inspect the dishwasher carefully from
time to time. To keep the dishwasher in perfect condition, we recommend
using special dishwasher cleaner once every 4 - 6 months (e.g. Calgonit).
Overall condition
•
Check the washing zone for sediments of fat and limescale. If there are
sediments, fill the dishwasher detergent container and run the program
at the highest temperature.
•
Wipe the door sealing regularly with a wet cloth to remove sediments.
•
Check the salt level indicator; add salt if needed.
•
Check the rinse aid indicator. Add rinse aid if needed.
Discharge filters
The discharge filters protect the pump against large particles from the
washing water. These particles can clog the filters. The filtering system (Fig.
1) consists of the main filter (1), rough filter (2) and soft filter (3).
Check the condition of the filters after each washing.
You can remove the filter system after unscrewing the rough filter drum. Remove sediments and clean the filters under
running water. Follow the reverse steps to reinstall the filters.
Never use the dishwasher without a properly installed filter system!
Spray arms
Calcium and dirt from the washing water can block the jets and bearings of the spray arms.
•
Check the output jets of the spray arms for food remnants.
•
If necessary, unscrew and remove the arms (Fig. 15). Rinse them under running water and reinstall them.
88
MNV2445
EN
Fig. 14
Fig. 15
