94
EN
LKR7460ber / LKR7460bel
Important Notesv
• In the case of a power failure, or if the appliance is unplugged and plugged in again, the gas in the cooling
system of your refrigerator will destabilise, causing the compressor protective thermal element to open. Your
refrigerator will start to operate normally after 5 minutes.
• If the appliance will not be used for a long period of time (such as during holidays), disconnect the plug.
Defrost and clean the refrigerator, leaving the door open to prevent the formation of mildew and odour.
• If the problem persists after you have followed all the instructions above, please consult the nearest
Authorised Service Centre.
• This appliance is designed for domestic use and for the stated purposes only. It is not suitable for commercial
or common use. If the consumer uses the appliance in a way that does not comply with these instructions,
we emphasise that the manufacturer and the dealer will not be responsible for any repair or failure within
the guarantee period.
TIPS FOR SAVING ENERGY
1. Install the appliance in a cool, well-ventilated room, but not in direct sunlight and not near a heat source
(such as a radiator or oven) otherwise an insulating plate should be used.
2. Allow warm food and drinks to cool before placing them inside the appliance.
3. Place thawing food in the refrigerator compartment. The low temperature of the frozen food will help cool
the refrigerator compartment while the food is thawing. This will save energy. Frozen food left to thaw
outside of the appliance will result in a waste of energy.
4. Drinks or other liquids should be covered when inside the appliance. If left uncovered, the humidity inside
the appliance will increase, therefore the appliance uses more energy. Keeping drinks and other liquids
covered helps preserve their smell and taste.
5. Avoid keeping the doors open for long periods and opening the doors too frequently as warm air will enter
the appliance and cause the compressor to switch on unnecessarily often.
6. Keep the covers of the different temperature compartments (such as the crisper and chiller) closed.
7. The door gasket must be clean and pliable. In case of wear, replace the gasket.
TECHNICAL DATA
The technical information is situated in the rating plate on the internal side of the appliance and on the energy
label.
The QR code on the energy label supplied with the appliance provides a web link to the information related to
the performance of the appliance in the EU EPREL database.
Keep the energy label for reference together with the user manual and all other documents provided with this
appliance.
It is also possible to find the same information in EPREL using the link https://eprel.ec.europa.eu and the model
name and product number that you find on the rating plate of the appliance.
See the link www.theenergylabel.eu for detailed information about the energy label.
1 INFORMATION FOR TEST INSTITUTES
Appliance for any EcoDesign verification shall be compliant with EN 62552.
Ventilation requirements, recess dimensions and minimum rear clearances shall be as stated in this User
Manual at Chapter 2. Please contact the manufacturer for any other further information, including loading
plans.
Содержание LKR7460bel
Страница 2: ...2 LKR7460ber LKR7460bel CZ ...
Страница 25: ...25 CZ LKR7460ber LKR7460bel ...
Страница 48: ...48 PL LKR7460ber LKR7460bel ...
Страница 73: ...73 PL LKR7460ber LKR7460bel ...
