92
EN
LKR7460ber / LKR7460bel
BEFORE CALLING AFTER-SALES SERVICE
Errors
Your fridge will warn you if the temperatures for the cooler and freezer are at improper levels or if a problem occurs with
the appliance. Warning codes are displayed in the freezer and cooler indicators.
ERROR TYPE
MEANING
WHY
WHAT TO DO
E01
Sensor warning
Call Service for assistance as soon as possible.
E02
E03
E06
E07
E08
Low Voltage Warning
Power supply to the device
has dropped to below 170 V.
-
This is not a device failure, this error helps to
prevent damages to the compressor.
-
The voltage needs to be increased back to required
levels
If this warning continues an authorised technician
needs to be contacted.
E09
Freezer compartment
is not cold enough
Likely to occur after long
term power failure.
1. Set the freezer temperature to a colder value or
set Super Freeze. This should remove the error
code once the required temperature has been
reached. Keep doors closed to improve time
taken to reach the correct temperature.
2. Remove any products which have thawed/
defrosted during this error. They can be used
within a short period of time.
3. Do not add any fresh produce to the freezer
compartment until the correct temperature has
been reached and the error is no longer.
If this warning continues an authorised technician
needs to be contacted.
E10
Fridge compartment is
not cold enough
Likely to occur after:
-
Long term power failure.
-
Hot food has been left in
the fridge.
1. Set the fridge temperature to a colder value or set
Super Cool. This should remove the error code
once the required temperature has been reached.
Keep doors closed to improve time taken to reach
the correct temperature.
2. Please empty the location at the front area of air
duct channel holes and avoid putting food close
to the sensor.
If this warning continues an authorised technician
needs to be contacted.
E11
Fridge compartment is
too cold
Various
1. Check is Super Cool mode is activated
2. Reduce the fridge compartment temperature
3. Check to see if vents are clear and not clogged
If this warning continues an authorised technician
needs to be contacted.
Содержание LKR7460bel
Страница 2: ...2 LKR7460ber LKR7460bel CZ ...
Страница 25: ...25 CZ LKR7460ber LKR7460bel ...
Страница 48: ...48 PL LKR7460ber LKR7460bel ...
Страница 73: ...73 PL LKR7460ber LKR7460bel ...