Concept2 LA7991bc, Руководство пользователя, Страница: 72 / 84

72
LA7991bc
EN
TIPS FOR USE
• We do not recommend putting hot food or fluids that are still evaporating inside the refrigerator. It will increase the
humidity inside the refrigerator.
• Food intended for refrigerating should be wrapped or covered. It is recommended to use plastic bags, kitchen foil
or food paper to wrap food. Liquids should be stored in closed containers or bottles.
•
It is also not recommended to put beverages in glass bottles in the freezer, glass can easily rupture due to low
temperatures inside the freezer.
Please follow the instructions below to avoid degrading of stored food.
• Do not open the refrigerator door for longer than necessary, as the supply of warm air significantly increases the
temperature inside the appliance.
• Clean surfaces that may be in contact with food and drainage channels regularly.
• Fresh meat and fish should be stored in a suitable place to avoid contact with other foods.
USER MANUAL
Before first use
Before first use you should wipe the outside and inside of the appliance with a damp cloth for hygiene reasons. Wash
all removable parts with warm soapy water.
After installing the refrigerator, leave the appliance standstill for at least 4–6 hours before connecting to the mains. It
is necessary to allow the cooling gases to set down. Then you can connect the refrigerator to the mains and let it run
for 2-3 hours t
o stabilize a normal operating temperature. Then put fresh or frozen food inside the appliance.
Note : If a power failure occurs during the first run, wait for at least 5 minutes before switching on again or connecting
to the mains.
Unlocking the Control Panel
•
The control panel gets locked automatically after 20 seconds of inactivity to prevent accidental resetting of the
temperatures in the refrigerator, freezer or wine cooler.
•
To unlock the control panel, click anywhere on the control panel and press and hold the sensor button “SMART
MODE” (14) for 3 seconds after it lights up.
• Press the sensor button (14) for 3 seconds to lock the control panel, the Panel Lock icon (13) will light up.
Setting the Temperature of Refrigerator Zone
•
Press the sensor button “FRIDGE” (5) to adjust the temperature inside the refrigerator by 1 °C steps.
• If you press the button (5) continuously, the temperature will be set in the following order:
04 > 03 > 02 > 02 + Super COOL > 08 > 07 > 06 > 05 > 04
• The temperature inside the refrigerator can be set between 2 °C and 8 °C.
• To switch off the refrigeration chamber, long press the sensor button (5) for 5 seconds. After you hear a sound
signal, the refrigeration chamber is switched off. The refrigerator display shows “- -”.
• To switch the refrigeration chamber back on, long press the sensor button (5) for 5 seconds. After you hear a sound
signal, the refrigeration chamber is switched on. The temperature display shows the temperature of the refrigerator
before it was switched off.
Setting the Temperature of the Variable Zone
•
Setting the Temperature inside the Freezer
•
Press the sensor button “FREEZER” (7) to adjust the temperature inside the freezer by 1 °C steps.
•
If you press the button (7) continuously, the temperature will be set in the following order:
-18
>
-19
>
-20
>
-21
>
-22
>
-23
>
-23 + Super Freeze
>
-15
>
-16
>
-17
>
-18
• The temperature inside the freezer can be set between -15 °C and -23 °C.