EN
71
KTV3344
3. Put the appliance on the edge of the cabinet and run the power cord through the rear wall of the cabinet so that
its plug or relevant circuit breaker are accessible after installation.
4. Push the appliance carefully to the selected place in the cabinet. Be careful not to squeeze the power cord.
5. Fix the appliance to the box by screwing the attached screws in the holes in the appliance‘s side walls. The holes
can be seen after opening the door.
6. Plug the supply cable into the wall outlet.
Disassembly
To uninstall the appliance, it is important to proceed correctly:
1. First, unplug the power cord from the mains (pull out the plug or switch off the respective circuit breaker).
2. Remove the attachment screws.
3. Slide out the appliance and at the same time pull out the power cord carefully.
it is not deformed or excessively bent.
Follow the installation instructions below:
1. Remove all packing and marketing material from the appliance before you use it for the first time.
2. For the required built-in box dimensions see Fig. 1a and 1b. For the sake of efficient air circulation the appliance
has to be located according to the dimensions on the pictures and the design of the cabinet must enable air flow
into its bottom part.
Fig. 1a
min. aeration
surface 250 cm
2
min. aeration
surface 250 cm
2
Fig. 1b
TROUBLESHOOTING
Problem
Cause
Resolving
The appliance doesn’t work.
The plug is inserted into the socket
incorrectly or insufficiently.
Check the plug connection.
