Concept2 KTV 3344, Руководство пользователя

Страница: 69 / 76

EN
67 KTV3344
1. Place your meal on the slide-in tray into the slide-in height, and close the door (2).
2. By pressing the ON/OFF symbol (2), turn on the appliance. The „900 W“ and „01:00“ indications will light up on the
display (5).
3. By turning the function selector (1), activate the function of pre-selected programs .
4. By turning the -/+ selector (9), select the required pre-selected program (Refer to the table above).
5. By pressing the symbol (6), activate the function of the pre-selected program.
6. By pressing the symbol (4), activate the set-up of the weight of the meal to be made.
7. By turning the -/+ selector (9), select the required weight of the meal to be made.
8. By pressing the START/PAUSE symbol (8), turn the selected program on.
Should you need to interrupt the program, e.g. for stirring food, press the START/PAUSE symbol (8) and open the
door (2). After closing the door (2), press the START/PAUSE symbol (8) again and the program will resume.
Note: If you open the door (2) while the program is running, the program run will interrupt automatically. After
closing the door, press the START/PAUSE symbol (8) again and the program will resume.
Should you need to stop the currently running program before the set time elapses, press the ON/OFF symbol (8)
and the appliance stops working.
9. Once the cooking is over, an acoustic signal will sound and the appliance turns off.
10. Open the door (2) and remove the food.
CAUTION!
If you take the food out of the oven before the set cooking time is over, or you do not use the oven, always clear the
currently used program, or turn the oven off by pressing the ON/OFF symbol (2).
e) Defrost function
The appliance offers 2 defrost modes:
* = Program with oven preheating
** = Program using just microwave heating
Program Number Function Use
P10** Heating Gravies, stewed meals
P11* Frozen meals Frozen pizza
P12* Frozen meals Frozen oven chips
P13* Frozen meals Frozen pasta
Program Number Function Note
d01 Meat defrost
After the acoustic signal, turn the foodstuffs over
and continue the program.
d02 Pastry, dough, fruit and vegetables defrost
1. Place the frozen meal on the rotary round plate (7) and close the door (2).
2. By pressing the ON/OFF symbol (2), turn on the appliance. The „900 W“ and „01:00“ indications will light up on the
display (5).
3. By turning the function selector (1), activate the defrost function .
4. By turning the -/+ selector (9), select the required pre-selected program (Refer to the table above).