EN
69
KTV3344
1. Select the baking function or the microwave c baking function.
2. Select the required program.
3. Set the required temperature.
4. By pressing the symbol (3), select the fast preheating function.
5. By pressing the START/PAUSE symbol (8), turn on the fast preheating of the selected program. After the selected
temperature is reached, the acoustic signal will sound and the symbol on the display (5) will start flashing.
Note:
If you open the door (2) during the preheating time, the fast preheating function turns off.
6. Place the meal to be made in the oven and close the door (2).
7. By pressing the START/PAUSE symbol (8), turn the selected program on.
Note:
If you do not press the START/PAUSE symbol (8) within 15 minutes, the appliance turns off.
8. Once the program is over, an acoustic signal will sound and the appliance turns off.
9. Open the door (2) and remove the meal.
10. The cooling ventilator will turn off automatically after couple of minutes.
CAUTION!
If you take the food out of the oven before the set cooking time is over, or you do not use the oven, always clear the
currently used program, or turn the oven off by pressing the ON/OFF symbol (2).
b) Child lock function
By simultaneously pressing the (6) and the START/PAUSE (8) symbols for 5 seconds, you will activate the child
lock in the switch-off mode. A long beep will sound and the symbol be lit on the display (5). Now, the appliance
control is blocked. You will deactivate the function using the same procedure. The symbol will go out.
c) Oven illumination automatic on/off
As long as the appliance is turned off, the oven interior illumination will automatically light up when the door (2) is
opened. After the door (2) is closed again, the interior illumination will go out.
During the program run and pause, the interior illumination is turned on.
d) Cooling ventilator
The ventilator is located on the upper wall of the oven; it provides the circulation of cool air in the equipment and
cools the oven‘s outer walls. The ventilator switches on automatically when the selected program is activated. After
the selected program is over, the cooling ventilator automatically stops within 15 minutes.
CLEANING AND MAINTENANCE
For the sake of good appearance and reliability, keep the appliance clean.
Clean the appliance after every use to prevent the accumulation of grease, burnt-on food remnants, and unpleasant
odours.
The parts of the appliance that come into contact with food have to be cleaned regularly.
If you do not keep the appliance clean, the surfaces may be damaged, which may lead to a shorter service life and
dangerous situations.
• Check regularly that the door sealing is not damaged. Do not use the appliance if the door or sealing is damaged.
• Prior to any maintenance or cleaning, disconnect the power cord from the mains or switch off the circuit breaker of
