43
ETV5260
EN
•
Do not use adapter plugs, connectors or extension cables. They could create a risk of fire due to
overheating.
• The cable plug or the breaker should be easily accessible after the installation.
• Only a qualified expert can perform connection changes.
• The electrical safety of the unit can only be guaranteed if the protective terminal of the unit is connected to the
protective conductor of the mains.
• The manufacturer bears no responsibility for damage caused to people or objects as a result of a missing or bad
protective connection.
• The power cord must be located so that it does not come into contact with hot parts of the unit and so that it is
not deformed or excessively bent.
Follow the installation instructions:
1. Remove all the covering and marketing materials from the unit before the first use.
2. For the required built-in box dimensions see Fig. 4. For the sake of efficient air circulation the unit has to be
located according to the dimensions on the pictures and the design of the cabinet must enable air flow into its
bottom part. The gap behind the rear wall of the built-in oven must be at least 50 mm.
3. Put the unit on the edge of the cabinet and run the power cord through the rear wall of the cabinet so that its
plug is accessible after installation.
4. Push the unit carefully to the selected place in the cabinet. Be careful not to squeeze the power cord.
5. Attach the unit to the cabinet by screwing 2 screws in the holes in the front wall (the screws go through points
A on Fig. 4). The holes can be seen after opening the door.
6. Plug the supply cable in the wall outlet.
(Fig. 4)
