Comtrol DeviceMaster Up, Руководство по установке оборудования

Страница: 21 / 56

Configuring the DeviceMaster UP DeviceMaster UP User Guide : 2000451 Rev. C - 21
Configuring the DeviceMaster UP Network Settings
7. Change the device network properties as required for your site.
8. Select
Apply Changes
and Close . It may take up to a minute for the
DeviceMaster UP status return to
ON-LINE
.
9. If you have not done so, upload the appropriate protocol firmware for your
environment using the next subsection,
Uploading Protocol-Specific Firmware
on the DeviceMaster UP on Page 22.
Select one of the following options:
Disable IP
Select this option if you want to run the device
using the MAC addressing scheme.
EtherNet/IP Users: The DeviceMaster UP does not
support Disable IP .
DHCP IP †
Select this option if you want to use the device with
DHCP. Make sure that you provide the MAC
address of the device to the network administrator.
Static IP
†
Select this option to program a static IP address
and type the appropriate IP address, subnet mask,
and default gateway values for your site in the
provided boxes.
† PROFINET Users:
The network address entered here must match the IP address
entered in SIMATIC
®
iMap. See the DeviceMaster UP
PROFINET User Guide for information about assigning
addresses.