Comtrend Corporation VR-3071 Series, Руководство пользователя

Страница: 3 / 227

2
WARNING

Disconnect the power line from the device before servicing

For indoor use only

Do NOT open the casing

Do NOT use near water

Do NOT insert sharp objects into the RJ-11 jack

Keep away from the fire

For use in ventilated environment / space

Use 26 AWG or larger cable connect to RJ-11 port

Débranchez l'alimentation électrique avant l'entretien


Cet appareil est conçu pour l'usage intérieur seulement

N'ouvrez pas le boîtier

N'utilisez pas cet appareil près de l'eau

N'insérez pas d'objets tranchants dans la prise RJ-11

N'approchez pas du feu

Veuillez utiliser dans un environnement aéré

Veuillez utiliser fil électrique de 26AWG pour port RJ-11
Power Specifications ( Alimentation ) :
Input : 12Vdc, 3.0A or 2.0A
Output : USB3.0, 900mA
User Information
Any changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
Aucune modification apportée à l’appareil par l’utilisateur, quelle qu’en soit la nature.
Tout changement ou modification peuvent annuler le droit d’utilisation de l’appareil
par l’utilisateur.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.