Comtrend Corporation VG-8050 Скачать руководство пользователя

Страница: 103 / 139

102

9.4 TR-069 Client

WAN Management Protocol (TR-069) allows an Auto-Configuration Server (ACS) to

perform auto-configuration, provision, collection, and diagnostics to this device.

Select desired values and click Apply/Save to configure TR-069 client options.

Option

Description

Inform

Disable/Enable TR-069 client on the CPE.

Inform Interval The duration in seconds of the interval for which the CPE MUST

attempt to connect with the ACS and call the Inform method.

ACS URL

URL for the CPE to connect to the ACS using the CPE WAN

Management Protocol. This parameter MUST be in the form of a

valid HTTP or HTTPS URL. An HTTPS URL indicates that the ACS

supports SSL. The “host” portion of this URL is used by the CPE

for validating the certificate from the ACS when using

certificate-based authentication.

ACS User Name Username used to authenticate the CPE when making a

connection to the ACS using the CPE WAN Management

Protocol. This username is used only for HTTP-based

authentication of the CPE.

Содержание VG-8050












































































































































Результаты поиска

Содержание VG-8050

Отзывы:

Похожие инструкции для VG-8050

Бренды по названию

Популярные бренды

Comtrend Corporation VG-8050, Руководство пользователя

Результаты поиска

Содержание VG-8050

Отзывы:

Похожие инструкции для VG-8050

Бренды по названию

Популярные бренды