Comtrend Corporation CT-5611TC, Руководство пользователя

Страница: 53 / 85

Source Port (port or
port:port) Enter source port number.
Destination IP address Enter destination IP address.
Destination Subnet Mask Enter destination subnet mask.
Destination port (port or
port:port) Enter destination port number.
6.4.2 MAC Filtering
NOTE: This function is only available when in bridge mode. PPPoE, PPPoA,
IPoA and MER use IP Filtering (pg. 49) to perform a similar function.
Each network device has a unique 48-bit MAC address. This can be used to filter
(block or forward) packets based on the originating device. MAC filtering policy
and rules for the CT-5611TC can be set according to the following procedure.
The policy
FORWARDED means that all MAC layer frames will be FORWARDED
except those matching the rules specified in the following table. BLOCKED
means that all MAC layer frames will be BLOCKED except those matching the
rules specified in the following table. The default policy is FORWARDED . This
can be changed by clicking the Change Policy button.
Choose
Add or Remove to configure MAC filtering rules. The following screen
will appear when you click Add . Create a filter to identify the MAC layer frames
by specifying at least one condition below. If multiple conditions are specified, all
of them must be met. Click
Save/Apply to save and activate the filter rule.
52