Comtrend Corporation CT-5611TC, Руководство пользователя

Страница: 29 / 85

Step 3: Upon completion click Next . The following screen appears.
The Device Setup screen allows the user to configure the LAN interface IP address
and DHCP server. If the user would like this ADSL router to assign dynamic IP
addresses, DNS server and default gateway to other LAN devices, select the radio
box
Enable DHCP server on the LAN to enter the starting IP address and end
IP address and DHCP lease time. This configures the router to automatically
assign IP addresses, default gateway address and DNS server addresses to each
of your PCs. Select
Enable DHCP Server Relay (if required), and enter the
DHCP Server IP Address.
NOTE 1: Enable DHCP Server Relay will not display if NAT is enabled.
NOTE 2: Ethernet and USB interfaces share the same subnet since they are
bridged within the router.
Step 4:
After entering your settings, select Next to display the following screen.
The WAN Setup-Summary screen presents the entire configuration
summary. Click
Save/Reboot if the settings are correct. Click Back if
you wish to modify the settings.
28