Comtrend Corporation AR-5319 Скачать руководство пользователя страница 176

Страница: 176 / 208

175

ENABLE NAT

If the LAN is configured with a private IP address, the user should select this
checkbox



. The NAT submenu will appear in the Advanced Setup menu after

reboot. On the other hand, if a private IP address is not used on the LAN side (i.e.

the LAN side is using a public IP), this checkbox



should not be selected, so as to

free up system resources for improved performance.

ENABLE FULLCONE NAT

This option becomes available when NAT is enabled.

Known as one-to-one NAT, all

requests from the same internal IP address and port are mapped to the same
external IP address and port. An external host can send a packet to the internal host
by sending a packet to the mapped external address.

ENABLE FIREWALL

If this checkbox



is selected, the Security submenu will be displayed on the

Advanced Setup menu after reboot. If firewall is not necessary, this checkbox



should not be selected so as to free up system resources for better performance.

ENABLE IGMP MULTICAST PROXY

Tick the checkbox



to enable Internet Group Membership Protocol (IGMP)

multicast. This protocol is used by IPv4 hosts to report their multicast group
memberships to any neighboring multicast routers.

ENABLE

IGMP MULTICAST

SOURCE

Enable the WAN interface to be used as IGMP multicast source.

Enable WAN interface with base MAC

Enable this option to use the router’s base MAC address as the MAC address for this
WAN interface.

STEP 4:

Choose an interface to be the default gateway.

Click

Next

to continue or click

Back

to return to the previous step.

Содержание AR-5319

















































































































































































































Результаты поиска

Содержание AR-5319

Отзывы:

Comtrend Corporation AR-5319, Руководство пользователя, Страница: 176 / 208

Результаты поиска

Содержание AR-5319

Отзывы: