Comtech EF Data Vipersat CDD-562L Скачать руководство пользователя страница 192

Страница: 192 / 254

CDD-562L/564 Demodulator with IP Module

Revision 2

HTTP (Web Server) Interface

MN/CDD564L.IOM

9–32

•

The

Management

VLAN ID us used to specify a dedicated management VLAN used to

access and control the modems.

For either Native or Management VLAN ID configuration, enter the following information:

•

VLAN ID:

Specifiy a value from

4095

•

VLAN Name:

Assign a label to the VLAN ID as needed.

•

Priority:

Use the drop-down list to select prioritize rules from

Click [

Submit]

to execute the entries made in this section.

VLAN Table

This

read-only

table list the VLAN rules by ID, Name, and Tag.

VLAN Table – Add/Delete

•

VLAN ID:

Enter an ID for the rule. Specifiy a value from

4095

•

VLAN Name:

Enter a name for the rule, using a maximum of 20 characters.

•

Type: Tagged

is the only rule option available at this time.

•

Add:

Click to add a VLAN priority rule. The entry will be added to the VLAN Table for

processing once the user clicks

[Submit]

•

Delete:

Click to flag a VLAN priority rule for removal from the VLAN Table. The VLAN

rule will be deleted from the VLAN Table once the user clicks

[Submit]

Click [

Submit]

to execute the entries made in this section.

Содержание Vipersat CDD-562L































































































































































































































































Результаты поиска

Содержание Vipersat CDD-562L

Отзывы:

Похожие инструкции для Vipersat CDD-562L

Бренды по названию

Популярные бренды

Comtech EF Data Vipersat CDD-562L, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Vipersat CDD-562L

Отзывы:

Похожие инструкции для Vipersat CDD-562L

Бренды по названию

Популярные бренды