Comtech EF Data Vipersat CDD-562L, Инструкция по установке и эксплуатации

Страница: 111 / 254

CDD-562L/564 Demodulator with IP Module Revision 2
CDD-56X CLI and Telnet Operation MN/CDD564L.IOM
8–7
Selection Entry Description
Managed Switch Multicast Option E Selectable only when Managed Switch is the selected Working
Mode: Allows user to enable or disable the ability to route multicast
IP traffic over the satellite or to another device on the local LAN.
Telnet timeout T Determines, in minutes (1-60), the period of Telnet inactivity before
the Telnet session is automatically terminated.
8.2.2.1 Name/Password Configuration page
Access the Name/Password Configuration page from the Administration page .
1. All Usernames and Passwords are case sensitive.
2. There is a minimum of 1 and maximum of 11 characters.
3. Any or all of the Usernames and Passwords can be removed by entering
“NONE NONE” from the CLI or Telnet.
4. Removing all Usernames and Passwords would only allow access to the
IP functions when connected via the Terminal Emulator (serial)
connection (because there is no log in).
5. FTP access is restricted to Admin Username/Password only. FTP is only
used to upgrade the IP SOFTWARE or to load or retrieve the IP
Parameter file.
Use this page to define the passwords required for access via HTTP, FTP, SNMP, and Telnet.
This
page contains the following unique selections/fields:
Selection Entry Description
Admin User/Password A Enter the user name and password with a space delimiter.
Example: <user> <passwd>
Type NONE NONE to erase
Read/Write User/Password W Enter the user name and password with a space delimiter.
Example:<user> <passwd>
Type NONE NONE to erase
Read Only User/Password R Enter the user name and password with a space delimiter.
Example:<user> <passwd>
Type NONE NONE to erase