29
VI.
systeM beHaVIor
Back at the main Toolbox page, selecting
System Behavior
allows you to set how the VH2’s audio I/O interacts with
your studio. The options are:
auto-ansWer
You can individually set each channel to auto-answer or not. If set to auto-answer, you can choose whether each
channel puts each call to “on-air” state or “on-hold” state.
studIo audIo I/o
Here you can select how many input and output audio ports are used on the VH2. The choices are:
a
Single In/Single Out
- Only the
CH 1 INPUT
and
CH 1 OUTPUT
are used. All callers hear
CH 1 INPUT
and all callers audio is output on
CH 1 OUTPUT
.
b
Single In/Dual Out
- The
CH 1 INPUT
is used, but both
CH 1 OUTPUT
and
CH 2 OUTPUT
are used. Caller audio appears separately on these channels (to be sent to two
separate console faders, for example). Both callers hear audio sent to the
CH 1 INPUT
.
c
Dual In/Dual Out
- Both
CH 1 INPUT
and
CH 2 INPUT
as well as
CH 1 OUTPUT
and
CH
2 OUTPUT
are used. Caller 1 hears
CH 1 INPUT
and appears on
CH 1 OUTPUT
. Caller 2
hears
CH 2 INPUT
and appears on
CH 2 OUTPUT
.
Note that none of these settings has any effect on whether callers hear each other. That function is chosen in the
next option.
about MIx-MInus
When we refer to “send” audio to the caller, we’re talking about the feed that is attached to the VH2
CH 1 INPUT
and CH 2 INPUT
. This is the audio that the caller hears when “on-air”. It is essential that these feeds are specially
mixed so that the caller output is not part of that mix. Many consoles provide for a special audio bus especially for
this function. On some other consoles, you can use the secondary or audition bus (with callers deselected) to create
this feed. But under no circumstances must incoming callers hear themselves sent back, or they will experience an
annoying echo.
caller MIx
Determines whether the callers can hear each other in the “conference” built within the VH2. If your console
provides individual mix-minus for telephone channels, this should be off, as the mix will be done in your console. If
the console doesn’t handle this, and you are using a single mix-minus for both channels, turn this function on so the
callers will be conferenced within the VH2.
Содержание VH2
Страница 1: ...Product Manual ...
