36
network tab
When this tab is chosen, as in
Figure 15
, the top section is populated with a list of network connected
devices that have, at one point, been attached to LiveShot. The first device is always the internal
Ethernet port, and on LiveShot Portable the second device is always the internal Wi-Fi access point.
fIgure 15
This is the section where, if necessary, you will configure your network devices. Often, this isn’t
necessary, because many configurations are saved in LiveShot. For example, it’s often not necessary to
configure any network parameters if:
1
You’re using Ethernet and DHCP.
2
You’re using a 3G/4G modem on a US wireless network (devices default to US
settings).
3
You’re using any adapter that has previously been installed and configured.
4
You’re using the Wi-Fi adapter on a Wireless LAN that you’ve used before.
If you’re doing any of the following for the first time, you’ll need to access and configure the network
device:
1
Using Ethernet on a static IP for the first time.
2
Using a 3G/4G network adapter on a non-US network.
3
Using a specific Wireless LAN for the first time.
