DH30 Product Manual
15
The record function controls a recording device through the
dB9 r
ECOrd
C
OntrOl
connecter. To use the record function, a recording device must be
connected to the
dB9 r
ECOrd
C
OntrOl
connector. The
A
Ux
O
Ut
connector
of the DH30 must also be connected to the recording device.
The record function has three settings: off, record-ready (standby) and on
(recording). Pressing the
r
ECOrd
button has different effects, depending
on whether the DH30 is on or off.
When the hybrid is recording, the LED flashes. When the hybrid is in
record-ready mode, the LED is steady. And when the hybrid is not record-
ing, the LED is not lit.
Recording Manually —
When the hybrid is on, press
r
ECOrd
to begin
recording. The LED will flash. When you turn the hybrid off or when you
press
r
ECOrd
again, recording will stop and the LED will go off.
Using Record Ready —
Press
r
ECOrd
when the hybrid is off. The
r
ECOrd
LED will illuminate. When the
O
n
button is pressed, recording begins
automatically and the
r
ECOrd
LED flashes. When the hybrid is turned off
or when you manually press the
r
ECOrd
button again, recording stops
and the
r
ECOrd
LED becomes steady, indicating record-ready mode is still
active.
Note: The
o
n
and
o
FF
buttons of the hybrid control the start and
stop signals of the record connector in record-ready mode. This is ideal
for unsupervised applications that use auto answer/disconnect in con-
junction with recording devices.
r
ecording
c
allS
