Computime TIMEVISION PLUS FACESCAN, Руководство пользователя

Страница: 9 / 29

T
IME
V
ISION
P
LUS
F
ACE
S
CAN
M
ANUAL
P
AGE
8 | 28
Network Installation
If you are planning to download via USB, please skip this section.
If you are planning to download over the network, you will need to configure your clocking
terminal on your network. Before continuing, you will need the following:

A unique static IP address on your network for the terminal to use

Your network’s subnet mask
 The default gateway on your network
If you are unsure of this information, please contact your IT.
Set the IP Address of the Terminal

Press ‘Menu’ .

Press ‘Comm’ .

Press ‘IP Address’ .

Type the IP address.
You can use the
‘←’ arrow to delete a single number, or ‘C’ to clear everything.

When you are done, press ‘OK’ . To cancel changes, press the red ‘X’ .

To save, press ‘Save’ . To exit without saving changes, press ‘Exit’ .
Set the Subnet Mask of the Terminal

Press ‘Menu’ .

Press ‘Comm’ .

Press ‘Subnet Mask’ .

Type the subnet mask.
You can use the
‘←’ arrow to delete a single number, or ‘C’ to clear everything.

When you are done, press ‘OK’ . To cancel changes, press the red ‘X’ .

To save, press ‘Save’ . To exit without saving changes, press ‘Exit’ .
Set the Default Gateway of the Terminal

Press ‘Menu’ .

Press ‘Comm’ .

Press ‘Gateway’ .

Type the default gateway.
You can use the
‘←’ arrow to delete a single number, or ‘C’ to clear everything.

When you are done, press ‘OK’ . To cancel changes, press the red ‘X’ .

To save, press ‘Save’ . To exit without saving changes, press ‘Exit’ .