Computime TIMEVISION PLUS FACESCAN, Руководство пользователя

Страница: 26 / 29

T
IME
V
ISION
P
LUS
F
ACE
S
CAN
M
ANUAL
P
AGE
25 | 28
Frequently Asked Questions
Q: The device’s touch screen isn’t very sensitive. What can I do?
Make sure you are using your fingertip to operate the touch screen as this will allow for greater
accuracy. You may also wish to try cleaning the screen of the device to ensure there is no dust
or debris which may be interfering with your presses. If this still does not resolve the issue, try
recalibrating the device as follows:
 Press ‘Menu’ .
 Press ‘Auto Test’ .
 Press ‘Calibration’ .
 Follow the on-screen prompts. The terminal will direct you to press the centre of a series
of crosses on different parts of the screen.
 If calibration was successful, you’ll return to the menu.
If it was unsuccessful, the system will prompt you to try again.
Q: How do I set the time/date on the clocking terminal?

Press ‘Menu’ .

Press ‘Date/Time’ .

Press ‘Date’ and enter the correct date using the numeric keypad. Press ‘OK’ to save.

Press ‘Time’ and enter the current time using the numeric keypad. Press ‘OK’ to save.

Press ‘Save’ when you have finished amending the date and time.
Q: How do I change the IP address of the clocking terminal?

Press ‘Menu’ .
Press ‘Comm’ .

Press ‘IP Address’ .

Enter the IP address using the numeric keypad.
You can use the
‘←’ arrow to delete a single number, or ‘C’ to clear everything.

When you are done, press ‘OK’ . To cancel changes, press the red ‘X’ .

To save, press ‘Save’ . To exit without saving changes, press ‘Exit’ .
Q: How do I change the volume of the clocking terminal?
 Press ‘Menu’ .
 Press ‘System’ .
 Press ‘Volume’ and select the appropriate level.
 Press ‘Save’ when you have finished making changes.