Computer Concepts Eagle M2, Руководство пользователя

Страница: 20 / 66

2. Installation
Fitting the Eagle expansion card — A3000
Before plugging Eagle into an A3000 you must change two
links on the Eagle card. These are:
LK4 and LK5 Change both jumpers from pins 2-3 to 1-2.
(Pin 1 is marked with a dot.)
The position of these links is shown in 9.
Technical
information.
Fitting the card
1 Disconnect the mains lead and all peripherals. You do not
need to remove the top cover of the computer.
2 Plug the expansion card into the external socket at the back
of the A3000.
Any expansion card plugged into an A3000 has little protection
against accidental damage. We therefore recommend that you protect
the card with a metal casing. Alternatively, Wild Vision can supply an
A3000 Expansion Box which provides three expansion sockets. Your
A3000 then has a total of four expansion sockets, the same as the
Archimedes and A5000. Contact Wild Vision for further details.
There are no further connections to make, as you cannot connect
the Eagle to the A3000's internal sound system.
Initial testing (Archimedes, A3000 & A5000)
Reconnect any previously connected peripherals, and switch
power on to your computer.
When the computer has finished its initialisation, go to the
command line (press F12) and type
P o dules and press Return.
This lists the expansion cards fitted in the computer. In the list the
following should appear:
W i l d V i s i o n / C C E a g l e M 2 V x . x x
where x . xx is the version number.
Press Return to return to the normal desktop display.
13