Computer Concepts Eagle M2, Руководство пользователя

Страница: 16 / 66

2. Installation
Remove the computer's cover — A5000 only
The cover is secured by six screws (three each side) located
underneath the case. Take care tilting or lifting the A5000 as the
screw-heads can scratch a wooden or polished surface.
Remove all six screws. The cover should then slide back off the
computer.
Expansion card positioning — Archimedes & A5000
With no expansion cards fitted, the rear panel of the main unit
consists of three metal blanking plates, each secured to the case by
screws at both ends.
The lowest plate (containing various sockets) is secured to the main
circuit board and should not be removed during expansion card
installation. The upper two plates are temporary fitments that are
removed when expansion cards, such as the Eagle card, are
installed.
One standard width expansion card occupies half the width of the
back panel. The numbers 0...3 on the diagram above indicate the
positions in which expansion cards may be fitted. With a two-socket
backplane only positions 0 and 2 are available.
9