Computer Concepts Eagle M2, Руководство пользователя

Страница: 19 / 66

2. Installation
...on
an A5000
The cable plugs into connector LK3, which
is towards the centre of the A5000 circuit
hoard. Make sure the cable is not twisted; the
rearmost pin on the Eagle card connects to the
rearmost pin on the A5000 circuit hoard.
Fitting the expansion card — Archimedes & A5000
Unscrew and remove the chosen blanking plate from the rear of
the case. The Eagle card can be fitted into any position.
The Eagle expansion card may now be inserted (usually from the
rear) and, whilst held horizontally, pushed into a corresponding
backplane socket. The backplane is supported by a strong metal
bar; however it is advisable to support it with one hand whilst
pushing the expansion card into place with the other hand.
If the Eagle expansion card is fitted adjacent to another card, bolt
their rear panels together after installation using the T-piece
provided. However, if no adjacent card is present, screw the half-
width blanking plate supplied to the Eagle rear panel.
Replace any screws that you removed from the blanking plate.
Ensure that the Eagle expansion card is screwed to an adjacent
expansion card or to the half-width blanking plate.
The Eagle card is now fitted ready for initial testing. Replace the
cover by sliding it hack onto the computer from the rear. Replace the
securing screws.
12