Component Playgrounds PH30-10, Руководство по установке

Страница: 29 / 35

Installation Instructions
Telescope
Using a small Phillips head screw driver and
a 1/4” socket.
Use 4-40 x 3/4” Machine Screws and 4-40
Nyloc Nuts to attach one side of the plastic
ring to the Bracket with welded washer.
Place the Base of the Telescope under the
lip of the plastic ring and attach the other
half of the plastic ring.
Telescope Base
Plastic Ring Halves
Bracket with welded washer
(Push 1-3/8” Plugs into both ends)
Assemble Telescope as shown above. Then
attach the Bracket to the Barrier with
Panel Clamps, 3/8” x 2” Carriage Bolts and
Hex Nuts.