background image

Residential Products 

Limited Lifetime Warranty 

 

 
 
Component Playgrounds works to build heavy duty products that will stand up to the heavy use of active 
children. You can trust Component Playgrounds because of the way we design and build our products. 
We make products that are simple to own, and easy to maintain. This adds up to the best value on 
playground products that you can count on, and that kids will play on time after time. 
 
 

Component Playgrounds warrants to the original purchaser/property owner that its’ residential grade 

products are free from defect in materials and workmanship. This warranty is non-transferrable and will be 
honored only after proper registration.  
 
This warranty is not extended to cosmetic items such as scratches, dents, fading, discoloring, paint wear, 
rust, weathering, or decorations. The warranty as stated is valid only if equipment is properly installed as 
detailed in the installation instructions provided. All parts are subject to normal wear for the purpose of 
which they were designed.  
 
When attached to the structure, plastic slides should not be lifted up from the bottom for any reason. 
Cracks at the top of the slide that result from lifting the bottom of the slide will not be covered under the 
terms of this warranty.  
 
This warranty is void should the equipment be subject to vandalism, misuse, neglect, abuse, improper 
installation, tampering, or accident. This equipment is not to be altered, or modified, by anyone other than 
Component Playgrounds or its authorized agent. This warranty does not cover damage resulting from 
flood, fire, catastrophe or other acts of nature. 
 
 To the extent permitted by law, Component Playgrounds shall not be liable for any direct, indirect, 
special, incidental, or consequential damages.  
 
Should it be found that your product has parts that are defective within the warranty period, contact 
Component Playgrounds for a warranty return authorization number. 

Unauthorized returns will be refused 

and returned to sender

. Defective part(s) must be photographed from a minimum of three different angles 

that clearly show the problem, and the installation of the defective part by its self and in relation to the rest 
of the structure. After obtaining a return authorization number: Return parts, freight prepaid, to the 
Component Playgrounds’ plant with proof of purchase for repair or replacement. Component Playgrounds 
will evaluate the part(s) and the photographs and decide if the part(s) in question should be repaired or 
replaced. This warranty does not cover costs related to removal, transportation and/or labor.  
 
This equipment is rated as commercial grade for residential use and is intended to be used in a private 
residential environment. This equipment may not meet all of the safety guidelines as described by the 
CPSC as it relates to public use/commercial playground equipment. For more information on public or 
commercial playgrounds, please visit 

www.cpsc.gov

 

 
Component Playgrounds sales representatives or its agents are not authorized to modify or substitute 
claims which are not part of this exclusive written warranty. This warranty is void if the product is in any 
way modified from its original state, or if it is used for purposes other than the purpose for which it was 
intended.

Содержание PH30-10




































Отзывы: