manualshive.com logo in svg

Compex WP11B+, Руководство пользователя

Поделиться
Скачать
Compex WP11B+ Скачать руководство пользователя страница 117

Appendix III  Configuration and Commands on Telnet Interface 

 

 

 

107 

AIII-4 

If you have any problem to accessing to the Internet 

 

Should you have any other problem accessing to the Internet we suggest you check 
through the following list of common solutions. 
 
1.

 

Make sure the Cable or ADSL modem is powered ON first followed by Compex 
WP11B+. The PC should be powered ON after the devices are ready. 

 
2.

 

Always use the cable provided with the modem.  

 
3.

 

For any reason that you may want to change cables note that there are many 
different brands of broadband modems. Depending on the model approved by 
your ISP, some modems use a MDI (straight-through) while others use MDIX 
(cross-connect) cable. Use the right cable. 

 
4.

 

Check PC has TCP/IP protocol installed. Check also that the TCP/IP properties 
are set to the following: 

•

 

obtain IP automatically 

•

 

Gateway has no entry 

•

 

DNS is check on Disable DNS 

 

Check whether your PC has obtained an IP address and other TCP/IP properties 
like DNS address from the router. 

 

5.

 

Click START | RUN | and type the command, 

WINIPCFG

 and press the 

“Enter” key.  From the IP Configuration box, select the LAN adapter and view 
the IP address. It should be 192.168.168.xxx. 

 

Generally, the first PC to startup and connect to the gateway will have an IP 
address 192.168.168.100 and the next one 192.168.168.101 and so on. 
Obtaining an IP address indicates the PC has successfully connected to the 
Compex WP11B+. 
 
But if you have a different number like 169.xxx.xxx.xxx (xxx can be any 
number) it means the PC is not talking to the gateway. You should check the 
cable connection with Compex WP11B+ again. 
If you have the correct IP address but is still unable to connect to a Web site, 
then click on 

More Info

 button. Check the DNS Servers box. Make sure they 

are the correct DNS IP address from your ISP. 
 
From your PC to open a DOS environment and run, 

PING 165.21.100.88

, or for 

example 

PING www.cnn.com

. If you can receive replies from the PING 

command, it indicates the router has successfully connected to the ISP. But if 

Содержание WP11B+























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды