manualshive.com logo in svg

Compex WP11B+, Руководство пользователя

Поделиться
Скачать
Compex WP11B+ Скачать руководство пользователя страница 105

Appendix I 

Login to Web-based Interface manually 

 

 

 

95 

Appendix I 

Login to Web-based Interface manually 

AI-1  Configuration of Compex WP11B+ using Web-based Interface 

 
Another method of logging to web-based interface is to key in the IP Address manually.  
This is quite tedious as the default IP Address for AP Bridge/Client Mode is different 
from Gateway You need to configure your PC’s IP Address whenever you switch the 
working mode. The IP Address of your PC must be configured as the same subnet as 
Compex WP11B+. 
 
To install a browser on the PC or workstation, make sure that TCP/IP protocol is 
installed and configured. Configuration will be much simpler. If you decided to obtain 
the IP address dynamically and use default IP addresses. Compex WP11B+ comes with 
a built-in DHCP server that automatically assigns IP addresses, DNS and Gateway 
information to the computers connected in the same network. It has been pre-configured 
with IP address and Subnet Mask of 192.168.168.1 (for AP Bridge and AP Client mode) 
and 255.255.255.0 respectively. 
 
An Internet browser can be used to configure the Compex  WP11B+. The most 
commonly used browsers include the latest Netscape Navigator, Netscape 
Communicator and Microsoft Internet Explorer browsers as they support frames and 
Java. We recommend you use Netscape Communicator V4.06 and higher, or Microsoft 
Internet Explorer 4.0 and higher. 
 
Assuming that Compex  WP11B+ is in its default setting, which is in the AP Bridge 
mode, start running your browser on a workstation connected onto the same network as 
the Compex WP11B+ by entering the URL address,

 http://192.168.168.1

. 

 
 

Login to Web Browser Interface 

 

The following is a list of the various ways for different browsers to access a website. 
Follow the instructions for the browser that you use. 

 

In Netscape Navigator 

 

1.

 

Select the 

File

 menu, then select 

Open Location

. 

 
2.

 

In the 

Open Location

 dialog box, key in the IP address of the Compex  WP11B+. 

This address is set at the factory to: http://192.168.168.1. 

 
3.

 

Click on the “Open” button. 

 

Содержание WP11B+























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды