Compex NETPASSAGE Series Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 78

Compex NETPASSAGE Series Скачать руководство пользователя страница 73

Chapter 8 Troubleshooting

65

Chapter 8

Troubleshooting

•

Based on which TH102-A firmware release is this Quick Install Guide written?

This Quick Install Guide is written based on TH102-A firmware release 2.69 Build 1203,
Jan 15, 2002.

•

I have connected the RJ45 10Base-T Ethernet port of TH102-A to a Hub/Switch, but
the Ethernet Link LED does not light up.

Ensure that the Uplink Switch is pushed to the position labeled “HUB”.

•

I have connected the RJ11 Home Phoneline port of TH102-A to a Home Phoneline
NIC compliant with HPNA 1.0, but the HPNA 2.0 Link LED does not light up.

The HPNA 2.0 Link LED will not light not if it is connected to a Home Phoneline NIC
compliant with HPNA 1.0. The Link LED will only light up when there are transmissions.
You may test it by PINGING the IP address of the Home Phoneline interface. The default
IP address of the RJ11 Home Phoneline network interface is 10.0.0.1.

•

I have connected the RJ11 Home Phoneline port of TH102-A to my PC. The Link
LED lights up. However, I am not getting any response when I PING the default IP of
10.0.0.1. The operating mode of the TH102-A is Bridge Mode.

Ensure that your PC is configured with an IP address in the same subnet as the IP address
of the TH102-A. If the IP address of TH102-A has not been changed, you should configure
your PC with an IP address of 10.0.0.X where X could be any integer from 2 to 254.

•

I have connected the RJ11 Home Phoneline port of TH102-A to my PC. The Link
LED lights up, but the TH102-A does not assign any IP to my PC. My TH102-A is
operating in Bridge Mode

The DHCP Server of TH102-A is only present when NetPassage TH102-A is configured
with Router Mode. You need to manually configure your PC with an IP address.

•

My TH102-A is not functioning. One of the “Speed” LED keep flashing rapidly.

The firmware of your TH102-A is corrupted. Follow the sub-section titled

Firmware

Recovery

under section

Jumper Settings of TH102-A

in chapter

Getting Started

•

I need to bridge my Home Phoneline Network to an Ethernet network, but I am not
sure whether my TH102-A is already operating in Bridge Mode.

If the “Bridge Mode” LED of your TH102-A lights up, it indicates that the TH102-A is
operating in Bridge Mode.

«
...
71
72
73
74
75
...
»

Содержание NETPASSAGE Series















































































Отзывы:

Нет отзывов