Compex NETPASSAGE Series, Руководство пользователя, Страница: 38 / 78

Chapter 5 Navigating in the Web-based Configuration Interface
30
5.1.2.5 Sharing Cable Internet (BPA)
This is similar to the rest of the dynamic IP configuration. The difference is that this is a
customized setup screen for the subscribers of OPTUS in Australia.
Figure 5.1.2.5 Australia BPA Cable Configuration Page
Upon selection of Australia BPA Cable, you need to enter your parameters for the following
fields:
•
Username
•
Password
•
Idle Timeout
If you do not know what to assign to the above parameters, please check
with your Internet Service Provider for the username and password.
You do not need to configure the rest of the parameter, as most of the ISP
will dynamically assign them.
After filling in the data, please click
Save
and then
Reboot
so that the new setting will be
updated.
After Rebooting, please re-
logon
again. If you click on the
Connect
button and if all
connections are correct, the Message Window at the bottom of the page will display a
successful connection message.
The rest of the parameter field (eg. IP address, Network Mask, etc.) will be dynamically
assigned by your ISP.