Compex NETPASSAGE Series, Руководство пользователя, Страница: 19 / 78

Chapter 2 Getting Started
11
Chapter 2 Getting Started
Compex TH102-A comes with an embedded HTTP server that enables users to configure it via
a Web Browser Configuration for use on multiple platforms. For the ease of configuration
TH102-A, Compex has used a simple
Web based Configuration Interface
.
Before using the Web based Configuration Interface, please have the necessary equipment
ready.
1. Computer with HPNA Adapter or Ethernet Adapter
2. TH102-A
To get started, you can either connect one end of the telephone wire to the HPNA adapter of
your Computer and the other end to the telephone port of TH102-A (Labeled #14 on Figure
1.4c, Page 4). Alternatively, you can connect one end of the RJ45 cable is connected to the
Ethernet Adapter and the other end is connected to the WAN port of TH102-A (Labeled #15 on
Figure 1.4c, Page 4).
Please ensure that the telephone wire from the HPNA adapter is connected
to the RJ11 port of the TH102-A.
By default, Compex NetPassage TH102-A is configured with Bridge Mode. You may connect
to the web-based configuration interface of TH102-A with a JAVA-enabled web browser to set
the operating mode to Router Mode.
2.1 Configuration Requirements
If you are configuring the TH102-A from its RJ11 Home Phoneline (HPNA) interface, please
use the IP address of 10.0.0.1. You must also ensure that the IP address of your managing PC is
configured with an IP address of 10.0.0.X and a subnet mask of 255.255.255.0, where X is a
number between 2 to 253.
If you are configuring the TH102-A from its RJ45 10Base-T Ethernet interface, please use the
IP address of 192.168.168.1. You must also ensure that the IP address of your managing PC is
configured with an IP address of 192.168.168.X and a subnet mask of 255.255.255.0, where X
is a number between 2 to 253.
Please refer to Chapter 6, “TCP/IP Configuration” if you have difficulty in setting your IP
address.