Compex NETPASSAGE Series, Руководство пользователя, Страница: 22 / 78

Chapter 3 Hardware Setup for Bridging between Ethernet and Home Phoneline Network
14
Chapter 3 Hardware Setup for Bridging between Ethernet and
Home Phoneline Network
3.1 Using TH102-A in Bridge Mode
By default, Compex NetPassage TH102-A is configured with
Bridge
mode. You may use
TH102-A to bridge your Home Phoneline Network to an entire Ethernet network. Figure 3.1
illustrates a unit of TH102-A configured as a
Bridge
. Using TH102-A in
Bridge
mode is to
transfer the data traffic between the traditional Ethernet sequence and HPNA network segment.
Figure 3.1 TH102-A Functioning as a Bridge
3.2 Connection Procedures
The procedures for setting NetPassage TH102-A as a
Bridge
are rather simple.
1. Connect the RJ45 10Base-T Ethernet port of TH102-A to an Ethernet Hub or Switch
using a straight-through UTP cable (not provided in the package content).
2. Push the Uplink switch on TH102-A to the position labeled
HUB
.
3. Connect RJ11 HPNA port of TH102-A to RJ11 telephone wall jack using a telephone
wire, which is provided in the packaging content.
4. Carefully plug the power adapter to the DC output of TH102-A and turn the supply
on.