14
COMPARATO NELLO SRL
CAUTION:
THE WI-FI CONNECTION SERVES AS AN INTERFACE AND IS NOT DESIGNED TO BE INTEGRATED IN A WIRELESS CONTROL SYSTEM.
WI-FI COMMUNICATION (OPTIONAL)
If the actuator is equipped with a Wi-Fi communication module, you can connect to the device in order to adjust all the operation settings, view its status and run a diagnostic.
The built-in Wi-Fi communication module has an access point - Web server: when the actuator is powered, a password-protected Wi-Fi network is created.
Each actuator creates its own Wi-Fi network: the network name is written on the actuator cover (1).
The access password is unique for the Wi-Fi modules and is written on the actuator cover (2)
Wi-Fi password = 11235813
IP address: 192.168.4.1
If the device used for the connection does not automatically open the configuration screen, open a browser and type the IP address written on the actuator cover
IP address: 192.168.4.1
CONNECTION PROCEDURE
Open the management page of the device Wi-Fi network you want to connect to the actuator and scan the available networks.
1
2
3
Pick out the actuator Wi-Fi network name.
If the Wi-Fi network is not visible, check if the actuator is powe-
red.
The signal reception range as the crow flies is 160 m with “visi-
ble” devices: any wall or obstacle would reduce the maximum
reception range.
The first time you connect, you must enter the log in password.
The password will not be required again afterwards.
Now it is possible to access to the actuator network and view
the configuration and monitoring screen
1
1
2
2
3
3
DIAMANT SMART PRO / COMPACT SMART PRO / UNIVERSAL SMART PRO
