background image

DO NOT REMOVE THE COVER! 

SCREWS ARE SEALED. 

AN OPEN COVER IS CONSIDERED AS EVIDENCE OF TAMPERING AND WILL VOID THE WARRANTY! 

Diamant  

SMART 

PRO

Compact  

SMART 

PRO

Universal  

SMART 

PRO

Frequency 

Standard 

Signal reception distance 

Connection 

Wi-Fi capability 

Protocol 

Standard 

Speed 

Bit n. 

Stop bit 

Parity 

Operational room temperature 

Storage and transport conditions 

Maintenance 

Certification 
 

2,4 GHz 

802.11 b/g/n - 802.11 n (2,4 GHz), up to 150 Mbps 

160 meters with visible device 

Access point - Web server 

Operating parameters configuration, status and diagnostics 

Modbus - RTU 

EIA-RS 485 hald duplex mode 

9600 Baud/s 

None 

-10°C... +50°C 

-40°C... +80°C, RH max 95% - no condensa 

None 

CE

WI-FI

 *

MODBUS

SAFETY

3

COMPARATO NELLO SRL

DIAMANT SMART PRO / COMPACT SMART PRO / UNIVERSAL SMART PRO

*        in case of environments with a high-density Wi-Fi, such as exhibitions or airports, the Wi-Fi communication could be hindered and/or there could be a slow connection. 

INSTALLATION

 

The valve should be installed in such a way that the actuator connection is not facing downwards. 

When the valve works with low-temperature fluids (possible frost formation on the valve stem) or with high-temperature fluids (danger of actuator overheating), it is advisable to install it in the recommended 
position, as in the picture:

CAUTION: 

 

Do not use high-pressure water directly on the ac-
tuator (e.g. a pressure washer).

 

FORBIDDEN POSITION

 

RECOMMENDED POSITION

 

ALLOWED POSITION

 

Содержание Compact SMART PRO





















Отзывы: