Compaq T1500 - Windows-based Terminals - 72 MB RAM, Руководство по установке

Страница: 16 / 74

2 2 2 2
Chapter 1
Server resources can be provided from platforms other than the above-listed ones,
but Compaq has not certified other environments and can not be responsible for
any problems related to incorrectly configured servers. If you are going to operate
in a different server environment, read this entire document very carefully to
determine if there are any issues that you might need to resolve.
Overview of Installation Procedure Overview of Installation Procedure Overview of Installation Procedure Overview of Installation Procedure
There are two major parts to the installation:
1.
1. 1.
1. The first part is the configuration of the server resources necessary to use the
terminal.
2.
2. 2.
2. The second part is the installation of software provided on the installation CD.
The installation scripts on the CD are used to perform the second part; they are not
used for the first part because software tools should already exist on your server to
configure the server resources.
Note
Note Note
Note
Because portions of the software installed from the CD
depend on certain server resources, it is recommended
that you configure the server resources first before
installing software from the CD.
This document provides all the steps necessary to configure a complete set of
server resources for use with the terminals for this software release. For most of
the resources, you should refer to the instructions and manual pages that come
with the server software and operating system running on your server. Where
special configuration information applies specifically to the terminals, this document
provides that information. Many servers provide tools to configure the various
network resources required, recommended, or requested for use with the
terminals.