Compaq T1500 - Windows-based Terminals - 72 MB RAM, Руководство по установке

Страница: 64 / 74

50 50 50 50
Appendix A
“ G-Key Reset” Procedure “ G-Key Reset” Procedure “ G-Key Reset” Procedure “ G-Key Reset” Procedure
You may reset the terminal software settings by using the G-Key Reset procedure:
• Turn on power and upon hearing the first beep
immediately press the G G G G key.
The beep occurs coincident with expansion of the splash screen to full window
size. The Login
Login Login Login dialog box displays only if security is enabled, in which case
enter a valid administrator or user login name and password.
or
• If security is enabled, after turning on power you may wait until the Login Login Login Login dialog
box displays. Press Ctrl Ctrl Ctrl Ctrl+G G G G and then enter a valid administrator or user login
name and password.
Follow the prompts displayed on the screen.
Note
Note Note
Note
Your security access level may limit the resets available
to you. Refer to the on-line help documentation for
details.
Note Note Note Note
If the screen display becomes disabled because a
resolution or refresh rate incompatible with your
monitor has been selected, power on the terminal and
press the S
S S S key when you hear the beep. This will
restore the display settings to 640x480 at 60 Hz
(default), with which virtually all monitors can operate.
Note
Note Note
Note
If you converted the boot model to network boot and
want to return to local boot, power on the terminal and
press the L
L L
L key when you hear the beep. This will
permanently restore the boot model to local boot. To go
back to network boot, repeat step 6 of the above
procedure. The G
G G G-key reset does not reset the L- L- L- L-key
action.