Compaq T1500 - Windows-based Terminals - 72 MB RAM, Руководство по установке

Страница: 13 / 74

Overview Overview Overview Overview
Introduction
Introduction Introduction
Introduction
This guide explains how to install software from the installation CD onto your server
and how to configure the resources resident on the server to support Compaq
T1500 Windows-Based Terminals for this software release.
How to Use This Guide
How to Use This Guide How to Use This Guide
How to Use This Guide
For full access to all the terminal resources, you will need to plan and configure
your server setup as explained in Chapter 1 of this guide.
If you only want to verify basic operation of the terminal using local boot, go directly
to the quick-start procedure in Appendix A. However, you will have only limited
access to the terminal resources.
Terminal setup information is available from help files resident on the terminals and
complete instructions are available on line after terminal-server communication is
established.
References References References References
The following Requests for Comments (RFCs) should be reviewed:
Note
Note Note
Note
RFCs are freely available through the World-Wide
Web. They can be accessed from sites such as:
http://
www.cis.ohio-state.edu/hypertext/information/rfc.html