Compaq ProLiant Clusters HA/F100, Руководство администратора

Страница: 171 / 207

Troubleshooting the Compaq ProLiant Clusters HA/F100 and HA/F200 6-17
Compaq Confidential – Need to Know Required
Writer: Bryan Hicks Project: Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide Comments:
Part Number: 380362-003 File Name: g-ch6 Troubleshooting the Compaq ProLiant Clusters HAF100 and HAF200.doc Last Saved On: 8/24/00 12:04
PM
Table 6-6
Compaq Redundancy Manager Informational Messages
continued
Message Description Action
The loop has been locked by
another application. Another application has issued a
lock management command to
an array controller. The lock
management command only
allows viewing of the data. No action is needed to view the
data.
Another program has a lock on
the array controller(s). This
program is either still running or
has exited improperly.
It is recommended that
Redundancy Manager not be run
while another program has a
lock on the array controller(s).
To stop this instance from
starting, select the Cancel
button. To start this instance
select the Start button.
Another program has issued a
lock management command to
an array controller. The lock
management command only
allows viewing of the data. No action is needed to view the
data.
This RA4000/4100 is in
Active/Standby mode. All logical
disks in this array must have the
same path assignments. Are you
sure you want to continue? A request has been made to
change the status of a path in
an Active/Standby configuration. Proceed or click Cancel.
continued