![background image](http://html1.mh-extra.com/html/compaq/proliant-clusters-ha-f100/proliant-clusters-ha-f100_administrators-manual_2645161185.webp)
Using Compaq Redundancy Manager in a Single-Server Environment
B-5
Compaq Confidential – Need to Know Required
Writer: Bryan Hicks Project: Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide Comments: First Draft
Part Number: 380362-003 File Name: i-appb Using Compaq Redundancy Manager in a Single-Server Environment.doc.doc Last Saved On: 8/24/00
12:05 PM
Automatically Installing Redundancy Manager
Follow these steps to automatically install Redundancy Manager:
1.
Place the Redundancy Manager CD into the CD-ROM drive. It
automatically loads the Install program.
2.
Follow the instructions offered by the Redundancy Manager installation
screens.
3.
Remove the Redundancy Manager CD from the CD-ROM drive.
4.
Reboot the server.
Redundancy Manager is now installed on your computer. To use Redundancy
Manager, double-click on the icon.
Manually Installing Redundancy Manager
If the server is not set up to automatically load when the CD is placed in the
CD-ROM drive, follow these steps to manually install Compaq Redundancy
Manager:
1.
Place the Compaq Redundancy Manager (Fibre Channel) CD in the
CD-ROM drive.
2.
Select Settings from the Start menu.
3.
Select Control
Panel from the Settings menu.
4.
Select Add/Remove Programs from the Control
Panel.
5.
Press Install from the Add/Remove
Programs page.
6.
Press Next
from the Add/Remove
Programs page.
7.
Press Browse from the Add/Remove
Programs page.
8.
Locate the Redundancy Manager
SETUP.EXE
file on the Redundancy
Manager CD.
9.
Click Finish from the Add/Remove Programs page. The setup program
begins.
10.
Follow the instructions displayed on the Redundancy Manager
installation screens.
Содержание ProLiant Clusters HA/F100
Страница 8: ......