Compaq ProLiant 4500 Servers, Руководство по техническому обслуживанию и ремонту

Страница: 44 / 89

Diagnostic Tools
3-11
Maintenance and Service Guide
POST Error Messages
Continued
Error Code Beeps Probable Source of
Problem
Action
1792-Drive Array
Reports Valid Data
Found in Array
Accelerator.
Data will
automatically be
written to drive
array.
None This indicates that while
the system was in use,
power was interrupted
while data was in the
Array Accelerator
memory. Power was then
restored within eight to
ten days, and the data in
the Array Accelerator
was flushed to the drive
array.
No action necessary; no
data has been lost.
Perform orderly system
shutdowns to avoid data
remaining in the Array
Accelerator.
1793-Drive Array -
Array Accelerator
Battery Depleted -
Data Lost
(Error message
1794 also displays.)
None This indicates that while
the system was in use,
power was interrupted
while data was in the
Array Accelerator
memory.
Array Accelerator
batteries failed. Data in
Array Accelerator has
been lost.
Power was not restored
within eight to ten days.
Perform orderly system
shutdowns to avoid data
remaining in the Array
Accelerator.
1794-Drive Array -
Array Accelerator
Battery Charge Low.
Array Accelerator is
temporarily disabled.
Array Accelerator
will be re-enabled
when battery
reaches full charge.
None This is a warning that the
battery charge is below
75%. Posted writes are
disabled.
Replace the Array
Accelerator board if
batteries do not recharge
within 36 power-on
hours.
1795-Drive Array -
Array Accelerator
Configuration Error.
Data does not
correspond to this
drive array. Array
Accelerator is
temporarily disabled.
None This indicates that while
the system was in use,
power was interrupted
while data was in the
Array Accelerator
memory.
The data stored in the
Array Accelerator does
not correspond to this
drive array.
1. Match the Array
Accelerator to the
correct drive array.
-Or-
2. Run the System
Configuration Utility
to clear the data in
the Array
Accelerator.
Continued