2-14
Removal and Replacement Procedures
Maintenance and Service Guide
System Board
Figure 2-15. Removing the System Board
1.
Remove all option boards.
2.
Remove middle chassis brace.
3.
Remove processor board and memory board.
4.
Disconnect all cables from system board.
5.
Remove retaining screws and push the three I/O panel release tabs.
6.
Slide board toward front of chassis approximately 0.4 inches (1 cm) and lift board out.
7.
Reverse steps to replace system board.
NOTE: Be sure the switch settings on SW1 are set to the Tower configuration.
Содержание ProLiant 4500 Servers
Страница 2: ...CHMP ...