manualshive.com logo in svg

Compaq Professional SP700, Справочное руководство

Поделиться
Скачать
Compaq Professional SP700 Скачать руководство пользователя страница 74

5-4

    

CD-ROM Drive and PremierSound Audio System

Writer: bj pereira   Project: Compaq Professional Workstation SP700 Reference Guide   Comments: 320280-001

File Name: F-CH05.DOC   Last Saved On: 5/19/98 9:41 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

PremierSound Audio System

The PremierSound audio system included on your workstation allows you to
integrate voice messages and music directly into your files. Using a
microphone, you can record sounds as data on the hard drive. This sound data
may be used in many ways, for example; you can enhance presentation data
with voice and music.

If you choose to upgrade your audio system, you must disable the integrated
audio controller:

IMPORTANT:

  Do not remove the ESS 1869 driver from the Drivers window

in the Control Panel. Follow the instructions below.

1.  From the Control Panel in Windows NT Workstation, select Devices.

2.  From the Devices window, select the AudioDrive device.

3. Select 

the 

Stop button to stop the AudioDrive device.

4. Select 

the 

Startup button.

5. Select 

Disabled as the Startup Type for the AudioDrive.

6. Select 

OK.

7.  Close the Devices window.

8.  Restart the workstation for the changes to take effect.

9.  Proceed with the installation process for your upgrade audio controller

board.

Содержание Professional SP700





































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды