2-3
Compaq Professional Workstation SP700 Reference Guide
Writer: bj pereira Project: Compaq Professional Workstation SP700 Reference Guide Comments: 320280-001
File Name: C-CH02.DOC Last Saved On: 5/28/98 12:18 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Table 2-1
Computer Setup Features
Task
Computer Setup Selection
View the product name, processor
type/speed/stepping, CPU serial number,
system ROM date, system board revision,
installed memory size, and asset tracking
number
Select
File, then select System
Information.
Set the system time and date
Select
File, then select Set Time and
Date.
View the currently installed drive A:
(preinstalled diskette drive) and drive B:
devices and set resources for diskette drives
Select
Storage, then select Diskette
Drives.
Enable/disable diskette booting and diskette
writing
NOTE:
After saving changes to Removable
Media, the workstation will restart. Turn the
workstation off, then on, manually.
Select
Storage, then select Removable
Media.
View information regarding IDE devices
connected to the system
NOTE:
ATAPI devices (CD-ROM, tape) are
listed as ATAPI devices.
Select
Storage, then select IDE Devices.
Specify the boot order of installed peripheral
devices (such as diskette drive, hard drive, or
CD-ROM devices)
Select
Storage, then select Boot Order.
Set the energy saver mode to Advanced,
Disabled, or Minimal
Select
Power, then select Energy Saver.
Enable/disable timeouts or manually select
timeout values
NOTE:
These selections appear only if energy
saver mode is set to Advanced.
Select
Power, then select Timeouts.
Continued
