manualshive.com logo in svg

Compaq Professional SP700, Справочное руководство

Поделиться
Скачать
Compaq Professional SP700 Скачать руководство пользователя страница 11

xi

Compaq Professional Workstation SP700 Reference Guide

Writer: B J Pereira   Project: Compaq Professional Workstation SP700 Reference Guide   Comments: 320280-001

File Name: A-FRNT.DOC   Last Saved On: 5/29/98 1:03 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Symbols on Equipment

These icons may be located on equipment in areas where hazardous conditions
may exist.

Any surface or area of the equipment marked with these
symbols indicates the presence of electrical shock hazards.
Enclosed area contains no operator serviceable parts.

WARNING:

  To reduce risk of injury from electrical shock

hazards, do not open this enclosure.

Any RJ-45 receptacle marked with these symbols indicates a
Network Interface Connection.

WARNING:  

To reduce risk of electrical shock, fire, or damage

to the equipment, do not plug telephone or telecommunications
connectors into this receptacle.

Any surface or area of the equipment marked with these
symbols indicates the presence of a hot surface or hot
component. If this surface is contacted, the potential for injury
exists.

WARNING:  

To reduce the risk of injury from a hot component,

allow the surface to cool before touching.

WARNING:  

To reduce the risk of electric shock or damage to the

equipment:

■ 

Do not disable the power cord grounding plug. The grounding plug is
an important safety feature.

■ 

Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.

■ 

Disconnect power from the workstation by unplugging the power cord
from either the electrical outlet or the workstation.

Содержание Professional SP700





































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды